This section of the tutorials will provide information on the files and impulse response uploading procedures for Kemper Profiling Amp hardware units. The information in this article was last updated in 2018 and may not be current. To this end, official Kemper resources may be most appropriate to seek out.
File Type Overview
Like most DSP platforms, under the hood the Kemper Profiling Amp platforms operate on a proprietary firmware, and any importable external content will need to be in a format that is understandable by the system. In some cases, conversion is done upon import and transparent to the user, and with others external conversion is first required prior to attempted import. The Kemper Profiler has up through the latest update of this page (2018), required the latter.
For conversion to the Kemper proprietary cabinet configuration file format, one will need the "Kemper Cab Maker" software from the Utilities section of the Kemper Amps Downloads Page.
Third Party Reference Disclaimer: Any and all third party companies and products listed or otherwise mentioned on this site may be trademarks of their respective owners and are in no way affiliated or associated with OwnHammer, LLC. Product names are referenced solely for the purpose of identifying hardware used in the equipment chain for impulse response capture or are examples of companion products. Use of these names does not imply any cooperation or endorsement.
Choosing a selection results in a full page refresh.